| Message: | Technical parameters:
1. Power supply: AC 220 V (-5%~+10%), 50 Hz;
2. Measurement range: 2.0 m (±10mm);
3. Heating type: by an electric heater;
4. Heating power: 3200 W;
5. Bath circulation: by a magnetic circulation pump;
6. Temperature controlling range: 5~50°C; digitally displayed;
7. Temperature controlling accuracy: ±0.1°C;
8. Dragging speed: two grades, 10~50 mm/min, frequency conversion stepless adjustable;
9. Measurement accuracy: ±1 mm;
10. Ductility display: Controlled by microprocessor; digitally displayed after data processing;
11. Dragging force measurement range: 0~300 N;
12. Dragging force accuracy: ±1N;
13. Display resolution: 0.1 N
14. Data output:
(1) Communicate with a computer through a RS232 port;
(2) Printed out by a micro-printer;
15. Refrigeration type: by a compressor; input power is 800 W;
16. Ambient temperature: -10~+35°C;
17. Relative humidity: no more than 85%;
18. Total power consumption: not more than 4000 W;
More asphalt ductility tester:
DSHD-4508D Asphalt Ductility Tester
DSHD-4508F Asphalt Ductility Tester
DSHD-4508G Low Temperature Asphalt Ductility Tester
DSHD-4508J Asphalt Ductility Tester
DSHD-4508C Asphalt Ductility Tester |
my account
