| Message: | Main technical characteristics
1. It adopts integrated structure. It is novel, compact and beautiful.
2. It adopts touch button and digital display technologies, so it is easy to preset parameters. The timing time can be shown clearly and the instrument will stop timing when the timing time is over.
3. It is equipped with complete accessories. These accessories are equipped as per the requirements of SH/T0248 “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
4. The instrument can be used independently for cold filter plugging point test together with proper cooling bath or used for cold filter plugging point test as an accessory of relative low temperature tester.
C: Main technical specification and parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Working environment:
(1) Ambient temperature: -10～+35℃;
(2) Relative humidity: ≤85%;
3. Sample cup:
(1) Round glass cup with flat bottom;
(2) Inner diameter: 31.0～32.0㎜;
(3) Wall thickness: 1.0～1.5 mm;
(4) Height: 115～125㎜;
(5) There is a mark line at the 45 ml of the cup.
4. Filter: It is made of copper. Filter No. is 004 (363 mesh);
5. Total power consumption: not more than 150 W;
6. Pumping pressure: U type differential pressure meter 1961 Pa (200 mm H2O)
D:More low temperature tester:
DSHD-510E Solidifying Point&Cold Filter Plugging Point Tester
DSHD-510F1 Multifunctional Low Temperature Tester
DSHD-510-1 Solidifying Point Tester
DSHD-510D Pour Point&Cloud Point Tester
DSHD-510G-II Solidifying Point Tester
DSHD-510G-I Solidifying Point Tester
DSHD-510Z-1 Automatic Solidifying Point & Pour Point Tester
DSHD-2430 Freezing Point Tester
DSHC-1 Distillate Fuel Cold Filter Plugging Point Filter
DSH Solidifying Point Constant Temperature Water Bath
DSHD-510G Solidifying Point Tester |
my account
