| Message: | 1.Zhejiang Ceeto Molding Technology Co.,Ltd.located in No.78 Baiyunshan Road, Ningbo,China,Beilun District,Ningbo City,Zhejiang Province,China,with elegant environment and convenience, market information delivered smoothly.Ceeto Molding is Ceeto Molding which is a specialized inIndustry and agriculture,Manufacturing,Mold.
2.Ceeto MoldingDie casting for automobile gearbox housing is used to install the shell structure of transmission mechanism and its accessories. In order to reduce the wear and power loss of parts caused by internal friction, lubricating oil must be injected into the shell and each gear pair shall be lubricated by spatter lubrication. The working surface of parts such as shafts and bearings. Therefore, there are refueling ports on one side of the shell, oil discharge plug at the bottom, and the height of the oil surface is controlled by the position of the refueling port. Radial oil holes are drilled on the first and third gears of the first shaft and the second shaft, and radial oil grooves are arranged at the end of the hub of the reverse middle gear and the intermediate shaft constant meshing transmission gear to lubricate the needle bearing in the position. To prevent lubricating oil from The clearance between the shaft and the bearing cover flows into the clutch and affects its friction performance. The oil seal assembly is installed in the bearing cover, and the oil return groove in the inner hole of the bearing cover can prevent oil leakage. To prevent lubricating oil from flowing out of the second shaft back end. An oil seal assembly is fitted in the back bearing cover of the transmission. Seal gasket and apply sealant on the joint surface of bearing cover, rear cover, upper cover, front and rear shell to prevent oil leakage. In order to prevent the leakage of lubricating oil caused by the increase of oil temperature and pressure when the transmission is working, the ventilating plug is installed on the transmission seat and the back bea |
my account
