| Message: | 3.Lubricating sliding brass bush oilite bearing sintered maintenance free It is a self-libricating bearing materials suitable for high load low speed application which lubrications is difficult or need dry running. It is made by advanced powder metallurgy. It is based on three metal alloy types, bronze , iron and nickel each containing dry solid lubricant like graphite, molybdenum disulphide which uniformly dispersed within the metal matrix. The percentage, type and form of the solid lubricant is determined by the bearing application operating requirements in terms of specific load, sliding speed, temperature and other environmental factors. Material codeBronze FerrousNickelDICK85HB1DICK85HB2DICK85HB11DICK85HB12DICK85HF14DICK85HF18DICK85HN22DICK85HN23CuSn
8613/6-1CuSn
8613/12-1CuSnPb
8313/6-1CuSnPb
8413/8-1FeNiCu
8310/8-3FeCu
9404/8-2NiFeCu
6033/10-2FeCrNi
7218/20Density (g/cm3)6.867.25.865.965.8HB Hardness≥40≥50≥50≥50≥80≥50≥45≥55Compressive strength (Mpa)300180380220550180240180Max. Static load (Mpa)100501005010080100100Max. Dynamic load(Mpa)5025502550405050Max. Speed (m/min)1520151510101010Max. PV (N/mm〜m/min)6060606048483630Max. Temperature-50～+150-50～+150-50～+150-50～+1500〜+6000～+450-200～+650-100～+750Coefficient of friction (μ)0.12-0.180.10-0.150.15-0.220.12-0.180.30-0.450.30-0.450.25-0.400.35-0.50Coef. of linear thermal expansion （10-6K）1818181813131218 url:http://www.oilite-bearing.com |
my account
Is this a real buying request?