| Message: | Impact Modifier for pvc pipe and fittingProduct features:Use our polymer modifier WS-702E6 to replace ACR and soybean oil (or plasticizer) can improve the quality of PVC products and reduce the production cost.Use 2-2.5 phr of efficient PVC modifier WS-702E6 to replace 1.5-2 phr of ACR and 2-3 phr of soybean oil (or plasticizer), can reach or exceed the original product quality, increase the physical and chemical index, get bright surface, increase VEKA intensity, reduce 7-12% production cost.Our Ca/Zn stabilizer CZ-202, used together with impact modifier 702E6 will get better effect. The end product can reach SGS ROHS compliance.Reference formulaWater supply fitting Drainage fittingPVC100PVC100Precipitated CaCO312-20Precipitated CaCO325-35Ca Zn stabilizer CZ-203S4-4.5Ca Zn stabilizer CZ-203S4.2-4.8PVC modifier WS-702E62-2.5PVC modifier WS-702E62-2.5Titanium dioxide pigmentAppropriate dosageTitanium dioxide pigmentAppropriate dosageStearic acid0.1-0.3Stearic acid0.2-0.4PE wax0.2-0.3PE wax0.2-0.3Suggestion in product use:The manufacturer must increase or decrease PVC modifier 702E6 dosage according to the filler ratio in formula, keep modifiers 702E6 dosage within 2-2.5 and adjust lubricant dosage to achieve the best plasticizing effect.Strictly control process conditions, pay attention to back pressure and good balance of lubricant consumption to prevent the end products appear bubble, black spot and grey spot. url:http://www.pvc-stabiliser.com |
my account
Is this a real buying request?