high temperature felt

Create: 09/28/2019

Expired Date:	09/28/2019
Category:	Corner guards [Building&Construction]
Message:	Direction of our felt belt 1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter to see if the perimeter is the same. 2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to 170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃, idle for 2 hours. 3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg according to your needed and start to printing. Details could contact us as below: Skype:huataogroup www.industrial-felts.com ( Aluminium Exstruction and printing felt)





City:	shijiazhuang[CN]
Location:

Sep 29 2019	Silica Aerogel Heat Insulation Blanket And Panel With Low Thermal Conductivity	265
Sep 29 2019	8mm White Endless Nomex Felt Belt For Heat Transfer Printing Machine	246
Sep 29 2019	Silica Aerogel Thermal Insulation Felt /Blanket For Coating	295
Sep 29 2019	Heat Transfer Printing Machine Used Endless Nomex Felt Belt	250
Sep 29 2019	aerogel felt blankets	281
Sep 29 2019	aerogel blanket for industrial insulation	290
Sep 28 2019	heat ttransfer felt	286
Sep 28 2019	aerogel blankets	296
Sep 28 2019	aerogel blanket	258
Sep 28 2019	high temperature felt	322