| Message: | AAK adopts the high-pressure solution injection method, weakens the magnetism of the burr with the solution, and then uses the instantaneous impact force of the liquid to not only ensure that the burr of the hydraulic valve block is 100% eradicated, but also effectively clean each part of the hydraulic valve block. Most of its peers do not have such a process. After learning about it, the American customer sent an inquiry sheet for the hydraulic valve block worth US$20,000 within 20 minutes.
Throughout the entire hydraulic valve industry, the deburring of hydraulic valve block is still manual. The work piece is polished with tools such as file, sandpaper and grinding head. This method has blind spots, general effect and low efficiency, especially for the burrs in complex cross holes. Even the later inspection can not find the burr hidden in the hydraulic valve block.
Eric, an American hydraulic valve customer, purchased a batch of hydraulic valve blocks from a hydraulic valve manufacturer some time ago. Problems were found in the test stage. The pressure regulation of the hydraulic system was unbalanced. After careful analysis, it was found that there were different degrees of burrs at the cross holes of the hydraulic valve blocks. After modifying the hydraulic valve block sample several times, the burr could not be 100% eradicated. His client did not accept the quality of the hydraulic valve block, and Eric could only reconsider other manufacturers.
Eric saw an article on deburring treatment of hydraulic valve block of AAK hydraulic valve on B2B website and found that it was similar to his current problems. Eric sent us his hydraulic valve block drawing and the problems encountered by email. He asked us how to deal with the burr problem of hydraulic valve block?
|
my account
